our new IKEA kitchen – the assembly

After one week of preparations we continued the work with the little help of Jantschy, Tinka, Schorsch and our kitchen mastermind aka Tinkas dad, who had some experience with assembling (IKEA) kitchens. I’m so glad he joined the team… without him, his knowledge and his toolbox it would have taken forever! Let me tell you assembling your kitchen is not a walk in the park and the IKEA assembly service is probably worth EVERY penny!
kueche10
Tinkas dad arrived with a bunch of extra tools…
kueche09
kueche11
After we’ve mounted the wall suspension rail we started with the first cabinet (we made sure that every drawer and cabinet is marked with our tape number system and also all additional screws and stuff was in a little box inside the cabinet so it was much faster to know which piece goes where) Organization is everything! (although we doesn’t look very organized on the photo below)
kueche24
kueche25
As soon as all the cabinets were put in place we mounted the countertop. (We choose a white worktop with a high gloss finish and a solid aluminium edge) it’s devided by the beautiful ceramic Domsjö sink. (It was a good idea to choose this sink not only because its really beautiful but also because it saved us a lot of trouble: the worktop units can only be delivered until a lenght of more or less 3m and our kitchen is a little longer than 4m; so we decided to put a Domsjö sink between a short worktop and the long one and voilá you don’t need to patch up the countertops!)
kueche12a
kueche13
kueche14
kueche15
After we mounted the worktop and the sink Tinkas dad sawed the hole for the hob and we mounted the runners for the drawer and screwed the single cabinets together.
kueche16
kueche20
We put the kitchen appliances in place while Schorsch and Tinka took a little (and well deserved) break in the evening sun!
kueche18
kueche17
Schorsch was in charge for ajusting the drawers. (you can level them with small screws on the side of every drawer). While my mum showed total physical determination in mounting the Omlopp LED light system for illuminating the drawers. Unfortunately, the wires (of most of the strips in the left hand of the kitchen) are too short to reach the electronic transformer unit so we need to extend them. But we could testrun one of the cabinets and I love it (as much as my dad… look at the photo below! what a happy face!)
kueche19
kueche22
We had a little trouble with mounting 3 drawer fronts to one unit (for the fridge and the dishwasher) – we still got no solution for the dishwasher though, but the Dads helped us to cover the fridge which turned out really good and worked pretty well in combination with our fridge (I think if you go with the IKEA appliances you won’t have any trouble at all but working with third party appliances can be tricky).
kueche21
I can’t wait to get rid of the blue protection film! … but like always there are a few things to do in advance of unwraping the cabinets (get a backsplash, repaint some corners and scratches on the walls). But we are close….
kueche23